TiVo Home Network Settings (Non-MoCA)

• Adding a Space: select (SPC) at the top of the screen


• Capital Letters: select (ABC) at the top of the screen or use the Thumbs Up on the remote


• Special Characters: select (SYM) at the top of the screen


• Delete a Character: use the Rewind key (◄◄) on the remote 

1. Make sure the Wireless G adapter is open so that it forms an L shape (90 degree angle)


2. Insert one end of the USB cable into the Mini USB port on the adapter and the other end into a USB port on the back of the TiVo


3. Go to TiVo Central | Settings & Messages | Settings | Network and see the Network connection details reads No Connection
    
4. Select Change Network Settings to set up a network on a new router 
    
5. On the Change Network Settings page, choose Connect Using Wireless G Adapter and press Select on the remote
    
6. On the Wireless Network Name screen, highlight the correct Network name (SSID) and press Select on the remote
    
   • If you can't find the correct SSID, choose Enter Network Name and press Select on the remote to manually enter the SSID
      
7. On the Enter Network Password screen, enter the correct password, highlight Done and press Select on the remote
    
   • When finished, highlight Done entering network password and press Select 
      
8. The TiVo detects the Wireless G Adapter and displays the IP Address screen
    
   • Select Get Automatically from a DHCP server (typical)
   
   
   • Select No (or not sure) for the DHCP Client ID

Note: if Get Automatically from a DHCP server (typical) is not displayed, power cycle the Adapter and repeat steps 3-7

1. Make sure the Wireless G adapter is open so that it forms an L shape (90 degree angle) 
    
2. Insert one end of the USB cable into the Mini USB port on the adapter and the other end into a USB port on the back of the TiVo
    
3. Go to TiVo Central | Settings & Messages | Settings | Network and see the Type listed as Wireless Adapter
    
4. Select Change Network Settings to set up a network with a new router or to reset the network connection
    
5. On the Change Network Settings page, choose Connect Using Wireless G Adapter and press Select on the remote
    
6. On the Wireless Network Name screen, highlight the correct Network Name (SSID) and press Select on the remote
    
   • If you can't find the correct SSID, choose Enter Network Name and press Select on the remote to manually enter the SSID


7. On the Enter Network Password screen, enter the correct password, highlight Done and press Select on the remote
    
   • When finished, highlight Done entering network password and press Select 
      
8. The TiVo detects the Wireless G Adapter and displays the IP Address screen
    
   • Select Get Automatically from a DHCP server (typical)
   
   
   • Select No (or not sure) for the DHCP Client ID

Note: if Get Automatically from a DHCP server (typical) is not displayed, power cycle the Adapter and repeat steps 3-7

1. Connect one end of the Ethernet to an Ethernet port on the router, and the other end to the Ethernet port on the back of the TiVo


2. For 4K 6 Tuners, 6 Tuners and Minis on TiVo Experience 3
   
   
   • Go to TiVo Central | Settings & Messages | Network Settings and select Change Network Settings  
   
   
   • Select Change Network Settings
   
   
   • Make sure Ethernet is On and MoCA is Off
   
   
   • Select IP Address and select Get automatically from a DHCP server (typical<


3. 4K 6 Tuners, 6 Tuners , 4K Minis, and Minis on TiVo Experience 4
   
   
   • Go to TiVo Central | left arrow to Menu | Settings  | Network Settings
   
   
   • Select Change Network Settings
   
   
   • Make sure Ethernet is On and MoCA is Off
   
   
   • Select IP Address and select Get automatically from a DHCP server (typical)