Skip to main content
Astound Broadband

DRC800

View printable manual

 

Programming the Remote to your TV

DRC800.png
  1. Turn on the TV
     
  2. Press and hold the TV Key until the four function keys blink twice
     
  3. Enter the 4-digit code (below) for the desired device


     
  4. Aim the remote control at the device and press Power once. The device should turn off
     
    • NOTE: If it does not respond, repeat steps 1-4. If it still does not work, try Searching for the Code
 

Code Search Method

DRC800.png
  1. Turn on the TV
     
  2. Press and hold the TV key until the four function keys blink twice
     
  3. Press Power
     
  4. Repeatedly press ? until the device turns off (you may need to do this a number of times
     
  5. When the TV turns off, press OK to lock in the code
     
 

Changing Volume Lock

DRC800.png

While in CABLE mode, the volume is controlled through your cable box. If you would like to control the volume through your TV instead, follow these steps 

 

To control the volume through the TV while in Cable mode:
 

  1. Press and hold the TV key until the four function keys flash twice
     
  2. Press VOL +. You now control the volume through the TV whenever you change the volume level in Cable mode
     
  3. If you would like to return to volume control through the cable box, follow these steps:
     
    1. Press and hold CABLE until the four mode keys flash twice
       
    2. Press VOL +. You now control the volume through the cable box whenever you change the volume level in Cable mode

       
 

Button Functions

DRC800.png DCR800_buttons.png