Wi-Fi Network Name and Password Setup

• An SSID, also called a Network Name, differentiates one wireless LAN from another


• All access points and all devices attempting to connect to a specific wireless LAN must use the same SSID


• Use a hard-wired connection for best results
  
  
  • You may not see a login prompt when using a Wi-Fi connected device
  
  
  • Check the available Wi-Fi networks on your device settings and try again

Important: to quickly find the correct Local Access use Ctrl + F and search for your model number

• Archer C7 AC1750
• Arris Models (DG860, DG1670, DG2460, DG2470, DG3270, DG3450, TG2472, TG3452)
• Asus RT Series Models
• Calix Models (844G/854G Indoor ONTs, 844E-1 Wireless Router)
• eero
• Hitron Models (CGN, CGN3, Coda)
• Linksys BEFCMU4 All-in-One
• Linksys WRT54G2, e1000, e1203, ea2700 
• Linksys e2500, ea2750, ea6350
• Motorola SBG Series 
• Netgear R6220 AC 1250 Smart Router
• Netgear R7000 Nighthawk Router
• Netgear XR1000 Router
• Pace D5001 All-in-One
• Technicolor Models (CGM 4231, CGM 4234)
• Ubee All-in-One
• Ubee 1301
• Ultra TV MG Series (MG5000, MG5125G, MG5225G)
• Ultra TV DCX3635

1. ​​​​Enter 192.168.0.1 in a supported browser and hit Enter
   • For best results, use a physical, hard-wired connection
2. Enter the Username / Password as follows
   • admin / admin
3. Click OK, then click Wireless
4. In the Service Set Identifier (SSID) box, enter something easily to remember and recognize 
5. A WPA2 Password Field appears in this same section, populate an appropriate password
6. If a New Channel drop-down box is present, select auto and click Apply

Arris Models DG860, DG1670, DG2460, DG2470, DG3270, DG3450, TG2472, TG3452

1. ​​​​Enter 192.168.0.1 in a supported browser and hit Enter
   • For best results, use a physical, hard-wired connection
2. Enter the Username / Password as follows
   • admin /password
3. Click OK, then click Wireless
4. In the Service Set Identifier (SSID) box, enter something easily to remember and recognize 
5. A WPA2 Password Field appears in this same section, populate an appropriate password
6.   If a New Channel drop-down box is present, select auto and click Apply

1. ​​​​Enter 192.168.1.1 in a supported browser and hit Enter
   • For best results, use a physical, hard-wired connection
2. Enter the Username and Password printed on the device label
3. Click OK, then click Wireless
4. In the Service Set Identifier (SSID) box, enter something easily to remember and recognize 
5. A WPA2 Password Field appears in this same section, populate an appropriate password
6.   If a New Channel drop-down box is present, select auto and click Apply

Calix Models (844G indoor ONT, 854G indoor ONT, 844E-1 wireless router)

1. ​​​​Enter 192.168.1.1 in a supported browser and hit Enter
   • For best results, use a physical, hard-wired connection
2. Enter the Username and Password printed on the device label
3. Click OK, then click Wireless
4. In the Service Set Identifier (SSID) box, enter something easily to remember and recognize 
5. A WPA2 Password Field appears in this same section, populate an appropriate password
6.   If a New Channel drop-down box is present, select auto and click Apply

eero uses an App logon

1. Go the Settings Menu on the App
2. When prompted for a username and password, enter the password created at inital login

Hitron Models (CGN wireless gateway, CGN3 wireless gateway, Coda)

1. ​​​​Enter 192.168.0.1 in a supported browser and hit Enter
   • For best results, use a physical, hard-wired connection
2. Enter the Username / Password as follows
   • cusadmin / password
3. Click OK, then click Wireless
4. In the Service Set Identifier (SSID) box, enter something easily to remember and recognize 
5. A WPA2 Password Field appears in this same section, populate an appropriate password
6.   If a New Channel drop-down box is present, select auto and click Apply

1. ​​​​Enter 192.168.0.1 in a supported browser and hit Enter
   • For best results, use a physical, hard-wired connection
2. Enter the Username / Password as follows
   • leave blank / admin
3. Click OK, then click Wireless
4. In the Service Set Identifier (SSID) box, enter something easily to remember and recognize 
5. A WPA2 Password Field appears in this same section, populate an appropriate password
6.   If a New Channel drop-down box is present, select auto and click Apply

1. ​​​​Enter 192.168.1.1 in a supported browser and hit Enter
   • For best results, use a physical, hard-wired connection
2. Enter the Username / Password as follows
   • admin / admin
3. Click OK, then click Wireless
4. In the Service Set Identifier (SSID) box, enter something easily to remember and recognize 
5. A WPA2 Password Field appears in this same section, populate an appropriate password
6.   If a New Channel drop-down box is present, select auto and click Apply

1. ​​​​Enter 192.168.1.1 in a supported browser and hit Enter
   • For best results, use a physical, hard-wired connection
2. Enter the Username / Password as follows
   • leave blank / admin
3. Click OK, then click Wireless
4. In the Service Set Identifier (SSID) box, enter something easily to remember and recognize 
5. A WPA2 Password Field appears in this same section, populate an appropriate password
6.   If a New Channel drop-down box is present, select auto and click Apply

1. ​​​​Enter 192.168.1.1 in a supported browser and hit Enter
   • For best results, use a physical, hard-wired connection
2. Enter the Username / Password as follows
   • admin / motorola
3. Click OK, then click Wireless
4. In the Service Set Identifier (SSID) box, enter something easily to remember and recognize 
5. A WPA2 Password Field appears in this same section, populate an appropriate password
6.   If a New Channel drop-down box is present, select auto and click Apply

1. Enter 192.168.1.1 in a supported browser and hit Enter
   • For best results, use a physical, hard-wired connection
2. Enter the Username / Password as follows
   • admin / password
3. Click OK, then click Wireless
4. In the Service Set Identifier (SSID) box, enter something easily to remember and recognize 
5. A WPA2 Password Field appears in this same section, populate an appropriate password
6.   If a New Channel drop-down box is present, select auto and click Apply

1. Enter 192.168.1.1 in a supported browser and hit Enter
   • For best results, use a physical, hard-wired connection
2. Enter the Username / Password created at first login
3. Click OK, then click Wireless
4. In the Service Set Identifier (SSID) box, enter something easily to remember and recognize 
5. A WPA2 Password Field appears in this same section, populate an appropriate password
6.   If a New Channel drop-down box is present, select auto and click Apply

Netgear XR1000 Router uses a Webpage logon

1. Go to the Webpage Login
2. When prompted for a username and password, enter the password created at first login

1. Enter 192.168.0.1 in a supported browser and hit Enter
   • For best results, use a physical, hard-wired connection
2. Enter the Username / Password as printed on the device label
3. Click OK, then click Wireless
4. In the Service Set Identifier (SSID) box, enter something easily to remember and recognize 
5. A WPA2 Password Field appears in this same section, populate an appropriate password
6.   If a New Channel drop-down box is present, select auto and click Apply

1. Enter 192.168.0.1 in a supported browser and hit Enter
   • For best results, use a physical, hard-wired connection
2. Leave the Username and Password blank
3. Click OK, then click Wireless
4. In the Service Set Identifier (SSID) box, enter something easily to remember and recognize 
5. A WPA2 Password Field appears in this same section, populate an appropriate password
6.   If a New Channel drop-down box is present, select auto and click Apply

1. Enter 192.168.0.1 in a supported browser and hit Enter
   • For best results, use a physical, hard-wired connection
2. Enter the Username / Password as follows
   • user / user
3. Click OK, then click Wireless
4. In the Service Set Identifier (SSID) box, enter something easily to remember and recognize 
5. A WPA2 Password Field appears in this same section, populate an appropriate password
6.   If a New Channel drop-down box is present, select auto and click Apply

1. Enter 192.168.100.1 in a supported browser and hit Enter
   • For best results, use a physical, hard-wired connection
2. Enter the Username / Password as printed on the device label
3. Click OK, then click Wireless
4. In the Service Set Identifier (SSID) box, enter something easily to remember and recognize 
5. A WPA2 Password Field appears in this same section, populate an appropriate password
6.   If a New Channel drop-down box is present, select auto and click Apply

1. Enter 192.168.100.1 in a supported browser and hit Enter
   • For best results, use a physical, hard-wired connection
2. Enter the Username / Password as follows
   • Admin / password
3. Click OK, then click Wireless
4. In the Service Set Identifier (SSID) box, enter something easily to remember and recognize 
5. A WPA2 Password Field appears in this same section, populate an appropriate password
6.   If a New Channel drop-down box is present, select auto and click Apply

1. Enter 192.168.0.1 in a supported browser and hit Enter
   • For best results, use a physical, hard-wired connection
2. Enter the Username / Password as follows
   • admin / password
3. Click OK, then click Wireless
4. In the Service Set Identifier (SSID) box, enter something easily to remember and recognize 
5. A WPA2 Password Field appears in this same section, populate an appropriate password
6.   If a New Channel drop-down box is present, select auto and click Apply