Skip to main content
Astound Broadband

Reset a Router or 3-in-1 to Factory Default

  1. Last updated
  2. Save as PDF
 

Linksys E1000, E1200, EA2500, EA2700 and EA2750

  • With the Gateway powered on, press and hold the reset button for at least 30 seconds

  • Continue to hold the reset button while you remove the power cord from the back of the Gateway

  • Continue holding the reset button and plug the power cord back in, then release the reset button
 

Pac3 3-in-1 and Arris 3-in-1

  • With the Gateway powered on, press and hold the reset button for at least 30 seconds

  • Continue to hold the reset button while you remove the power cord from the back of the Gateway

  • Continue holding the reset button and plug the power cord back in, then release the reset button
 

WRT54G and WGC200

  • Open a web browser and type 192.168.1.1 in the address bar and hit Enter

  • Enter the Username and Password, then click OK

    • Username: leave this space blank

    • Password: admin

  • Go to Administration, then click the Factory Defaults link

  • Select Yes on Restore Factory Defaults and click Save Settings
 

BEFCMUH

  • Open a web browser and type 192.168.0.1 in the address bar and hit Enter

  • Enter the Username and Password, then click OK

    • Username: leave this space blank

    • Password:  admin 

  • Click on Status, then click the Security tab

  • Select Yes for Restore Factory Defaults and click Apply