Experience 4 Voice Remote

• Identifying a BT vs. RF remote:
  • If Last is printed in blue, the remote is a BlueTooth Remote
  
  
  • If Last is printed in white, the remote is an RF Remote

• TiVos on Experience 3*:
   
  • Tivo Central | Settings & Messages | Settings | Remote, CableCARD, & Devices | Remote Control Setup

*Please be aware that Voice commands cannot be utilized on Experience 3

• TiVos on Experience 4:
   
  • TiVo Home |left arrow to Menu | Settings | Remote, CableCARD, & Devices | Remote Control Setup

From the Remote Control Setup page, you will be able to select the following options:

Set TV power, volume, and mute

1. Select the TV brand (use Up, Down, or Ch Up, Ch Down to scroll), and press OK
    
2. Hold down the TV Power and TiVo buttons together, until the light comes on solid (about 5 seconds). Then release both buttons
    
3. Enter the first four-digit code from your list
    
4. Try your TV Power button. If you get no response, try steps 1-3 with the next code on your list
    
5. If you Can't find the TV code
    
   • Cover the end of the TiVo remote control with your hand
      
   • Hold down both the TiVo and TV Power buttons simultaneously until the light on remote remains lit
      
   • Remove your hand and enter code 0999; the light will flash three times and remain lit
      
   • Press Channel Up once every two seconds to search for the correct code
      
   • Once the TV turns off, press Enter to select the code
      
   • Press TV Power to test the code; if the TV turns on, the remote is programmed
      
   • If the TV does not respond, try these steps again 

Set TV input

For cycling through the video inputs of your TV
 

1. Select the TV brand (use Up, Down, or Ch Up, Ch Down to scroll) and press Select
    
2. Hold down the TV Input and TiVo buttons together, until the light comes on solid (about 5 seconds). Then release both buttons
    
3. Enter the first four-digit code from your list
    
4. Try your TV Input button. If you get no response, try steps 1-3 with the next code on your list
    
5. If you Can't find the TV code
    
   • Cover the end of the TiVo remote control with your hand
      
   • Hold down both the TiVo and TV Input buttons simultaneously until the light on the remote control remains lit
      
   • Remove your hand and enter code 0999; the light will flash three times and remain lit
      
   • Press Channel Up once every two seconds to search for the correct code
      
   • Once the TV changes inputs, press Enter to select the code
      
   • Press TV Input to test the code; if the TV turns on, the remote is programmed
      
   • If the TV does not respond, try these steps again 

A/V volume, and mute
 

1. Select the Audio/Video device brand (use Up, Down, or Ch Up, Ch Down to scroll) and press Select
    
2. Hold down the Mute and TiVo buttons together, until the light comes on solid (about 5 seconds). Then release both buttons
    
3. Enter the first four-digit code from your list
    
4. Try your Mute button. If you get no response, try steps 1-3 with the next code on your list
    
5. If You Can't find the Audio/Video device code
    
   • Cover the end of the TiVo remote control with your hand
      
   • Hold down both the TiVo and Mute buttons simultaneously until the light on the remote control remains lit
      
   • Remove your hand and enter code 0999; the light will flash three times and remain lit
      
   • Press Channel Up once every two seconds to search for the correct code
      
   • Once the volume mutes, press Enter to select the code
      
   • Press TV Input to test the code; if the TV turns on, the remote is programmed
      
   • If the TV does not respond, try these steps again 

Pair your Remote Control with Your TiVo Box

1. If you see this option, your remote can be paired to your TiVo via BT/RF signals. This is only available on 6 tuner and Mini 2 models
    
2. While on this screen, your remote should automatically start pairing within seconds. If not, press the TiVo and Back buttons together until the light at the top of the remote remains lit. Release the buttons and the light will blink yellow/amber while pairing
    
3. When the light stops blinking, press the TiVo button to return to the Home page
    
4. Press the blue Voice (microphone) button on the remote, to confirm the blue Voice icon appears on your TV screen. Your TiVo box is now Voice enabled
    
5. If this does not work:
    
   • Go to TiVo Home| left arrow to Menu | Setting | Remote, CableCard & Devices | Remote Setup | Pair your remote to your TiVo Box | Reset Remote Control Pairing | Unpair All Remote Controls
   • Press the TiVo and Back buttons to begin re-pairing

To enter IR mode:

Press and hold the + buttons until the activity indicator on the remote control lights. The remote remains in IR mode until you enter the key combination that puts the remote into BT/ RF mode.


Switching to BT/RF mode (for 6 Tuner TiVos):

Entering BT/RF mode causes a paired remote that is currently operating in IR mode to switch to BT/ RF mode. This procedure has no effect in New Pairing mode or when the remote is unpaired. 


To change the remote control from IR mode to BT/RF mode, press and hold the + buttons until the activity indicator on the remote control lights.

• On the T6, touch the amber image of the remote control on the front of the DVR:
  
• On the MG2, the remote finder button is on the back of the DVR:
  
  
   
• When pressed, a TiVo jingle will play on the remote
   
• When you find the remote, press any button to deactivate the sound, or just wait 15 seconds for it to turn off automatically
   

IMPORTANT: The remote must be in BT/ RF mode for this to work

IMPORTANT: You will need both the paired remote and the DVR to perform a global reset. If your paired remote has been lost or damaged, you will need to use a new remote in IR mode to put the DVR in a pairing state, then pair the new remote to the DVR. For instructions, see To Pair a different remote to your DVR.

1. Press and hold the + buttons until light on the remote blinks
   
    
2. Press three times, then press
    
3. The light on the remote will flash three times if the global reset is successful