Skip to main content
Astound Broadband

UR5U-8400

 

Three-Digit Code Programming Method

UR5U-8400.jpg
  1. Turn on the device you want to program (TV, DVD or AUX)
     
  2. Press the [Device] button (TV, DVD or AUX) to be programmed and [SELECT] button simultaneously for 3 seconds. The device LED will light for 20 seconds indicating the unit is ready to be programmed
     
  3. Point the remote control toward the device and enter the 3-digit code number assigned to your brand

    TV

    VCR & TV/VCR (use VCR key) 

    DVD & TV/DVD (use DVD key) 

    Audio Device (use AUX key)

    DMX & DCR (use AUX key) 
     

    • If the 3-digit code number you just entered is correct, the device will turn Off 
    • If it did not turn Off, continue entering code numbers listed for that brand until the device turns Off
       
  4. After you’ve entered the correct code number and the device has turned Off, press the [POWER] button to turn the device back On. Now it’s time to test the VOLUME and MUTE buttons for the TV (or PLAY and STOP buttons for VCR and DVD) to make sure they all work
     
  5. If any of the functions do not work as they should, repeat from STEP 3 using the next 3-digit code number listed for that brand
     
  6. Once you have found the correct 3-digit code, save it by pressing the same [DEVICE]  button one more time. The [Device] LED light will blink twice to confirm that the code was successfully stored
 

Auto Search Method

UR5U-8400.jpg If the three-digit code numbers assigned to your brand do not turn off your equipment or the code tables do not list your brand, you can use the Auto Search Method to find the correct three-digit code number for your equipment by the following steps:
 
  1. Turn on the equipment you wish to operate
     
  2. Press the [Device] button and [SELECT] simultaneously for 3 seconds. The device LED will turn on
     
    • The device LED will light on for 20 seconds. The next step must be entered while LED is on
       
  3. Press the [CH▲] or [CH▼] button one step at a time or keep it pressed. The remote will emit a series of Power ON/OFF commands. Release the [CH▲?] or [CH▼] button as soon as the equipment turns off.
     
  4. Verify that you selected the correct code by pressing [POWER] again. The equipment should either turn on or turn off
     
  5. Press the [Device] button to store the code. The device LED will blink twice to confirm that the code has been stored
 

Code Number Readback

UR5U-8400.jpg
  1. Press the [Device] button and [SELECT] simultaneously for 3 seconds
     

    The device LED will light on for 30 seconds. The next step must be entered while LED is on
     

  2. Press [INFO]. The device LED will blink number of times indicating the number of each digit of the code number
     
    • Each digit is separated by 1 second. Ten blinks is equal to the number 0
    • For example, 108 will be:  One blink, [one second off], ten blinks, [one second off], eight blinks
 

Programming a Second TV to AUX Button

UR5U-8400.jpg You can take advantage of the AUX function to program a 4th Component such as a second TV, VCR, DVD or Audio Component

 

  1. Turn on the equipment you wish to operate
     
  2. Press [AUX] and [SELECT] simultaneously for 3 seconds. The device LED will turn on
     
    • The device LED will light on for 20 seconds. The next step must be entered while LED is on
       
  3. Press [TV]. Point the remote control toward the Component and enter the 3-digit code number assigned to your brand

    TV

  4. If the 3-digit code number you just entered is the correct number, the Component will turn Off. If it did not turn Off, continue entering code numbers listed for that brand until the Component turns Off
     
  5. Test functions. (Same as for 3-Digit Code Programming Method - Section A). If any of the functions do not work as they should, you need to find a new code
     
  6. Press [AUX] one more time. The Device LED light will blink twice to confirm the code was stored