Skip to main content
Astound Broadband

UR4U-MDVR-CHD2

 

Quick Set-Up Method

  1. Turn on the device you want to program to program your TV, turn the TV on
     
  2. Point the remote at the TV and press and hold the TV key for 3 seconds. While Holding the TV key, the TV LED will light off and on again
     
  3. Begin to press the number keys, one at a time, starting with 1, then 2, 3, 4, 5, 6, 7, 8, 9, 0 until the TV turns off
     
  4. Release the TV key to save the code. The TV LED will blink twice to confirm the code is stored. Repeat these steps for your DVD, Aux, etc
 

Three-Digit Code Programming Method

UR4U-MDVR-CHD2_lg.jpg
  1. Turn on the device you want to program (TV, DVD or AUX)
     
  2. Press the [Device] button (TV, DVD or AUX) to be programmed and [OK/SEL] button simultaneously for 3 seconds. The device LED will light for 30 seconds indicating the unit is ready to be programmed
     
  3. Point the remote control toward the device and enter the 3-digit code number assigned to your brand

    TV 

    DVD (use DVD key)


    DVD Recorders (use DVD key) 


    TV/DVD Combos (use DVD key) 


    DVD/VCR Combos (use DVD key) 


    TV/VCR Combos (use DVD key) 


    VCR (use DVD key) 


    TV/DVD/VCR Combos (use DVD key) 


    Audio Device (use AUX key) 


    TiVo (use AUX key) 


    iPod Controls (use AUX key) 


    Media PCs (use AUX key) 


    Gaming Systems (use AUX key)  


    Lighting Controls (use AUX key) 


    Digital to Analog Converter box (use AUX key) 
     

    • If the 3-digit code number you just entered is correct, the device will turn Off 
    • If it did not turn Off, continue entering code numbers listed for that brand until the Component turns Off
       
  4. After you’ve entered the correct code number and the device has turned Off, press the [POWER] button to turn the device back On. Now it’s time to test the VOLUME and MUTE buttons for the TV (or PLAY and STOP buttons for VCR and DVD) to make sure they all work
     
  5. If any of the functions do not work as they should, repeat from STEP 3 using the next 3-digit code number listed for that brand
     
  6. Once you have found the correct 3-digit code, save it by pressing the same [DEVICE]  button one more time
     
  7. The [Device] LED light will blink twice to confirm that the code was successfully stored
 

Auto Search Method

UR4U-MDVR-CHD2_lg.jpg If the three-digit code numbers assigned to your brand do not turn off your equipment or the code tables do not list your brand, you can use the Auto Search Method to find the correct three-digit code number for your equipment by the following steps:
 
  1. Turn on the equipment you wish to operate
     
  2. Press the [DEVICE] button and [OK/SEL] simultaneously for 3 seconds. The device LED will turn on
     
    • The device LED will light on for 30 seconds. The next step must be entered while LED is on
       
  3. Press the [CH▲] or [CH▼] button one step at a time or keep it pressed. The remote will emit a series of Power ON/OFF commands. Release the [CH▲] or [CH▼] button as soon as the equipment turns off.
     
  4. Verify that you selected the correct code by pressing [POWER] again. The equipment should either turn on or turn off
     
  5. Press the [Device] button to store the code. The Device LED will blink twice to confirm that the code has been stored
 

Code Number Readback

UR4U-MDVR-CHD2_lg.jpg
  1. Press the [Device] button and [OK/SEL] simultaneously for 3 seconds
     
  2. The device LED will light on for 30 seconds. The next step must be entered while LED is on
     
  3. Press [INFO]. The device LED will blink number of times indicating the number of each digit of the code number
     
    • Each digit is separated by 1 second. Ten blinks is equal to the number 0
    • For example, 108 will be:  One blink, [one second off], ten blinks, [one second off], eight blinks
 

Programming a 4th Device to AUX Button

UR4U-MDVR-CHD2_lg.jpg You can take advantage of the AUX function to program a 4th Component such as a second TV, VCR, DVD or Audio Component

 

  1. Turn on the equipment you wish to operate

     

  2. Press [AUX] and [OK/SEL] simultaneously for 3 seconds. The device LED will turn on
     
    • The device LED will light on for 30 seconds. The next step must be entered while LED is on
       
  3. Press the [Device] button you want to setup. Point the remote control toward the Device and enter the 3-digit code number assigned to your brand

    TV 

    DVD (use DVD key)  


    DVD Recorders (use DVD key)  


    TV/DVD Combos (use DVD key)  


    DVD/VCR Combos (use DVD key)  


    TV/VCR Combos (use DVD key) 


    VCR (use DVD key) 


    TV/DVD/VCR Combos (use DVD key) 


    Audio Device (use AUX key) 


    TiVo (use AUX key) 


    iPod Controls (use AUX key) 


    Media PCs (use AUX key) 


    Gaming Systems (use AUX key) 


    Lighting Controls (use AUX key) 


    Digital to Analog Converter box (use AUX key)  

  4. If the 3-digit code number you just entered is the correct number, the Component will turn Off. If it did not turn Off, continue entering code numbers listed for that brand until the Component turns Off
     
  5. Test functions. (Same as for 3-Digit Code Programming Method - Section A). If any of the functions do not work as they should, you need to find a new code.
     
  6. Press [AUX] one more time. The Device LED light will blink twice to confirm the code was stored
 

Programming the System On/Off Button

UR4U-MDVR-CHD2_lg.jpg The System on/off button can send out up to three power on/off commands for the devices you programmed into the remote control
 
  1. Press [CBL]
     
  2. Press [System On/Off] and [OK/SEL] simultaneously for 3 seconds. The [CBL] button will turn on for 30 seconds
     
  3. Press [TV
     
  4. Press [DVD] (if adding)
     
  5. Press [AUX] (if adding)
     
  6. Press [CH?] to save the power commands you stored. The [CBL] button will blink twice to confirm
 

Programming Channel Controls

UR4U-MDVR-CHD2_lg.jpg Channel controls (CH▲, CH▼, LAST, 0-9) are factory-programmed to automatically transfer to the respective Device mode you select, as follows:

 

CBL : CBL            TV : CBL            DVD : DVD             AUX : AUX 


If you wish to store the TV channel controls in TV mode, use the following steps
 

  1. Press the [OK/SEL] button and [TV] button simultaneously for three seconds. The device LED will turn on for 30 seconds. The next step must be performed while the LED is on
     
  2. Press the [VOL▲] button. The device LED will blink
     
  3. Press [TV] button. The device LED will blink twice to confirm the programming


    To return TV device to CBL channel repeat steps above replacing [TV] with [CBL] in Step 3
 

Volume Control

UR4U-MDVR-CHD2_lg.jpg Volume and Mute control are factory programmed to the respective Device mode you select, as follows:

CBL : TV            TV : TV            DVD : TV            AUX : AUX 

 If you wish to store the Cable volume control in CBL mode, use the following steps
 

  1. Press [CBL] button and [OK/SEL] simultaneously for three seconds
     
    • The device LED will turn on for 20 seconds. The next step must be performed while the LED is on
       
  2. Press the [VOL▲] button. The device LED will blink
     
  3. Press [CBL] button. The device LED will blink twice to confirm the programming
     

To restore the volume control back to your TV in CBL mode, repeat the above steps by replacing [CBL] with [TV] in Step 3

 

Low Battery Warning

UR4U-MDVR-CHD2_lg.jpg When the battery is low, the remote control LED blinks 2 times whenever a [DEVICE] button is pressed to turn on equipment.
 

Memory Lock

UR4U-MDVR-CHD2_lg.jpg This remote control is designed to retain programmed memory for 10 years even after batteries are removed from the remote control.
 

Button Functions<

UR4U-MDVR-CHD2_lg.jpg UR4U-MDVR-CHD2_buttons.jpg