Skip to main content
Astound Broadband

TiVo Creek IPTV Remote

 

 

Programming the TV PWR Key

TiVoCreekRemote_IPTV.jpg
  1. Turn on the device (TV or audio device)
     
  2. Press and hold TiVo. While holding down TiVo, press power-symbol.jpg (power). Hold both for approximately 3 seconds. The activity indicator lights up red and stays on
  3. Using the numeric keys, enter the first code for your brand. The activity LED will blink 3 times and turn off





     
  4. Point the remote at your TV or audio device and press the Power key to see if it responds
     
  5. If the device does not turn off, repeat steps 3-5 using the next code listed for your brand
     
  6. For a TV, point the remote at the TV and press the Input, VOL and Mute keys
     
  7. If the TV Input or volume does not change, repeat steps 2-7, selecting the next code listed for your brand
     
  8. When the TV responds to key presses as expected, setup is complete
 

Programming the INPUT Key

TiVoCreekRemote_IPTV.jpg
  1. Turn on the device (TV or audio device)
     
  2. Press and hold TiVo. While holding down TiVo, press Input. Hold both for approximately 3 seconds. The activity indicator lights up red and stays on
     
  3. Using the numeric keys, enter the first ode for your brand. The activity LED will blink 3 times and turn off





     
  4. Point the remote at the device and press the Input key
     
  5. If the TV does not display the name of a signal source, repeat steps 3-5, selecting the next code listed for your brand
 

Programming the VOL and MUTE Keys

TiVoCreekRemote_IPTV.jpg
  1. Turn on the TV or audio device
     
  2. Press and hold TiVo. While holding down TiVo, press Mute. Hold both for approximately 3 seconds. The activity indicator lights up red and stays on
     
  3. Using the numeric keys, enter the first ode for your brand. The activity LED will blink 3 times and turn off




     
  4. Point the remote at the device and test each of the Vol keys
     
  5. If the volume does not increase, decrease and mute, repeat steps 3-5, selecting the next code listed for your brand
     
  6. If the volume controls all functions as expected, setup is complete
 

Code Search Method

TiVoCreekRemote_IPTV.jpg If you can't find the exact code for your device (for example, the TV power works, but not the volume), try this method
 

 

  1. Press and hold TiVo. While holding down TiVo, press power-symbol.jpg (power). Hold both for approximately 3 seconds. The activity indicator lights up red and stays on
     
  2. Enter code 0999; the light will flash three times and remain lit
     
  3. Press Channel Up once every two seconds until the device turns off
     
  4. Press Power to test the code; if the device turns on, the remote is programmed
     
  5. If the device does not respond, turn it on manually and try these steps again
 

Resetting, Re-Pairing Remote to Box

TiVoCreekRemote_IPTV.jpg

If you are seeing a 'Pair Your TiVo Remote' screen, follow this link

  • If your remote can already control the Android TV device, then it is paired. If the remote is not paired with the device:
     

    Please note: Only one remote can be paired with one Android Box at a time. If you are using a replacement remote and have the original, you need to return the original, then pair the new one to the Android Box using the steps below:

    1. Place or hold your remote no more than 2 feet from the Device
       
    2. Press and hold the BACK, and TiVo buttons together until the activity light turns red. The light will flash yellow quickly when the remote is paired
       
    3. The IPTV box should automatically pair with the remote. If unsuccessful, Reboot the android device using the reset button under the equipment.The reset button can be pressed using a paper clip. If the devices are still not paired, repeat the steps above.
 

Button descriptions

TiVoCreekRemote_IPTV.jpg

buttons1.jpg