The Actiontec WECB3000n Wi-Fi extender connects using MoCA signals running through a coaxial cable to extend Wi-Fi services
-
-
Using WPS to Configure
-
- Press the WPS button (top or right-hand panel) on the device for no less than eight seconds
- Within two minutes, press the WPS button on the router/gateway
- A red ring around the WPS button on the Extender blinks and then goes out.
- When this happens, the Extender’s network settings will be identical to router.
-
Using Web Link to Configure
-
- Once hooked up, have the customer open http://wecb-XXXX.local on a browser
- XXXX is the last four digits of the device's serial number, found on the label located on the back panel
- Enter admin / admin as the username / password
-
Verifying Wireless Settings
-
- Once logged in, a Status screen will display
- Click on the Wireless Setup icon at the top of the screen
- Select Wireless Security
- Change the wireless settings (SSIDs / passwords) for 2.4 and 5GHz networks to match that of the router / gateway
|
