Skip to main content
Astound Broadband

URC2069

 

Programming TV into the Remote (Popular Brands)

URC2069.jpg Use the following instructions to program the remote for a TV
  1. Turn on the TV
  2. Press and hold SETUP until LED blinks twice
  3. Press the TV POWER key, LED remains ON
  4. Press and hold down the DIGIT key for your TV brand
     
    Digit  TV
    1 Insignia / Dynex
    2 LG / Zenith
    3 Mitsubishi
    4 Panasonic
    5 Philips / Magnavox
    6 Samsung
    7 Sharp
    8 Sony
    9 Toshiba
    0 Vizio
 

Programming TV into the Remote (Direct Code Entry)

URC2069.jpg
  1. Turn on the TV
     
  2. Press and hold SETUP until LED blinks twice
     
  3. Enter the 1st TV code for your brand from the code list to the right. LED blinks twice

    TV   -- >
     
  4. Press the TV POWER key to test TV control. If the TV turns off, setup is complete
     
  5. If TV does not turn off, repeat steps 1-4  using the next code for your TV brand
 

Code Search

URC2069.jpg If the Brand of your TV is not listed in the code list, try searching for your code
  1. Turn on the TV
     
  2. Press and hold SETUP until LED blinks twice
     
  3. Press and hold down the OK/SELECT key
     
  4. Let go of the OK/SELECT key when the TV turns offf
 

Volume Control

URC2069.jpg This remote can be configured to control the volume through any programmed device. When programming the remote for a TV or DTA, the last programmed device will be the volume source. This setting can be changed at any time with the following sequence(s):   Volume Control Through TV
  1. Press and hold SETUP until LED blinks twice
  2. Press VOL +. The LED will blink twice as confirmation


Volume Control Through DTA
  1. Press and hold SETUP until LED blinks twice
  2. Press MUTE. The LED will blink 4 times
 

Button Functions

URC2069.jpg URC2069_buttons.jpg